Accessories

CH Battery charger

The CH battery charger gives the possibility to interchange the plug type with a simple “slide on” operation. This gives great versatility and a logistical advantage reducing stocks and costs.

Click here for the CH data sheet

CHJ2

The charger CHJ2 has been specially designed for use as a wall-charger for the JUMBO system.

The CHJ2 charger is a Switch Mode Power Supply (SMPS) version which makes charging of the batteries more efficient.  The charging time for a BAJ1 or a BAJL (Standard) battery pack is approx. 4 hours. Mains voltage from 100 V AC - 240 V AC (50/60 Hz) is possible on same charger.  The charger indicates whether the charger is connected to the mains (green LED) or whether the battery is being charged (yellow LED). Medically approved.

LS / LSD

There are two types of LINAK® limit switches, for actuators type LA22, LA30, LA30S, LS and LSD.

The LSD type controls the stroke length of the actuator between two fixed end positions by cutting off the current to the motor.  The LS type gives signal in two fixed end positions, but requires a control unit to stop the actuator when the micro switches are activated.

Click here for the LS / LSD data sheet.

MBJ

Depending on what your JUMBO system consists of you need to use one of the following three mounting brackets MBJ1, MBJ2, or MBJ3.

TR6 / TR7

The TR6 is a separate external power supply box, which can be wall-mounted or placed on the floor.  It replaces the TR7.

The TR6 operates via a 24V power cable.

Click here for the TR6 data sheet.

TR-EM Motor controller

TR-EM-208 is designed specially for spindle motor use.

Adjustable soft start, soft stop and current limit are main features of the card. Additionally impulse or continuous type control can be selected as the control mode. Control input can be set to positive or negative (gnd) logic.

Click here for the TR-EM data sheet.