Outside UK phone +44 1355 587163
LINAK control boxes link control units with actuators so that their movements are perfectly controlled. Various accessories can also be connected to the system through a control box.
The control box CB6 has been specially developed for use together with LA27 in the healthcare industry.
The control box is designed to be mounted on the linear actuator LA27 as with the CB9 and the LA31 system. The control box CB6 has a LED power ON indicator, detachable mains cable and strain relief for all cables.
The control box CB6 communicates with the LA27 by means of the built-in end stop signal switches in the actuator. Due to the signal switches the power to the motor will be cut off in the control box and not in the actuator. This ensures that it is only possible to run in the opposite direction once the actuator has reached the end position.
Compared to other LINAK control boxes the CB7 is very small and compact in design. The CB7 is designed to slide onto an LA31 actuator for easy fitting e.g. in a recliner application where "mounting" space is limited.
The control box function is divided in two parts. The actual control box CB7, which slides onto the LA31 HOMELINE actuator and a separate external power supply transformer box TR6, which can be wall mounted or placed on the floor moulding next to the mains. The control box is only fitted with low voltage electronic components and the connection between the CB7 and transformer is via a 24 V power cable.
The CB8-A is a battery powered control box operating up to 3 actuators individually. One of these channels can be used either as an external emergency stop device or for battery charging.
The CB8-T is developed for use with LINAK actuators and controls. The control box can operate up to 2 actuators individually.
The CARELINE® Basic CB9 has been developed for use together with LA31 and LA34 in the care & rehab industry.
CB9 and LA31 can be fully integrated thus saving mounting and wiring or they can be installed separately.
The CB12 product range features three standard versions, which are ideal for many medical applications and industrial applications.
In general the CB12 can control up to 4 actuators and it has a range of built-in safety features such as battery back-up and wet alarm.
The CBD4 control box is a sophisticated control box in the LINAK DESKLINE® product range and it is the perfect choice for all types of desks. The CBD4 ensures that the DESKLINE application has a very low and pleasant noise level and a constant speed level.
The control box is compatible with a wide range of columns, built-in actuators and the LA31 single actuator with hall print and mini fit cable, optimising logistics as you only need one box for each system.
The CBD4 ensures optimised parallel drive for 2, 3, or 4 legs in parallel or a smooth drive as a single leg control box. The control box has an extreme low power consumption of only 0.1 W in standby mode.
The DESKLINE® control box family CBD6S (SMPS) is an optimum choice for a wide range of desk applications.
The CBD6S is perfect if you need a small and compact control box that requires a minimum of space when mounted.
The CBD6S lifts the line of intelligent DESKLINE control boxes to a new level. While keeping the advantages from earlier generations it adds so much more.
It is the most compact and lightweight control box in the DESKLINE series. It keeps the same width as DESKLINE columns with motor housings ensuring that it ﬁ ts in a desktop frame, and it is only 38mm high.
The control boxes CBJ1 and CBJ2 are part of the battery driven JUMBO system. JUMBO is a modular system combining an actuator, a control box (CBJ1/CBJ2), a battery (BAJ1/BAJ2) and a charger (CHJ2) in a flexible solution, specially developed for patient lifts.
The complete system is medically approved and contains a series of features which meet the patients need for a safe and comfortable lift, e.g. CBJ1 and CBJ2 are equipped with a soft-start/stop function, emergency lowering function etc.